Version 1.0
~~~~~~~~~~TheREALGonz's Patented Tutorial~~~~~~~~~~~~~~~~~~~
-------==============A 10 Step tutorial==============-------
ATTNT:WINDOWS 98 USERS ONLY CAN MAKE THESE DISKS AND READ THEM
	
	Introduction- One day I was fooling around on my computer when I
did not have the internet any longer. I was formatting a whole bunch of
1.44 Meg Floppy disks so I could use them. I found something to make higher 
capacity disks. By the end of this tutorial you should be able to make 1.44
Meg Floppy Disks into 2.56 Meg Floppy Disks like nobodys business.

Step 1 - Insert the 1.44 Meg Floppy disk into your Floppy Disk drive.
Step 2 - Open "My Computer" and right click on 3 Floppy then when the 
	 drop down menu appears select "Format" and then click 
	  (REFER TO TUT1 IN Folder TUTPictures)
Step 3 - I reccomend just clicking start when the "Format" screen 
	 comes up unless you are an advanced user.
	  (REFER TO TUT2 IN Folder TUTPictures)
Step 4 - When done formatting a small summary will be displayed. 
	 It has no meaning.
	  (REFER TO TUT3 and TUT4 IN Folder TUTPictures)
Step 5 - When you are done formatting you must again right click on 
	 3 Floppy then select "Properties" 
	 (It is ok if it says you have 1.38Meg free) Then Click on
	 the tab "Compression" remember only Window 98 users can do this
	 If you do this and expect  any other OS (Operating System) to
	 read this disk it will not. When you are done clicking the 
	 "Compression" tab 
	 (REFER TO TUT5 and TUT6 and Tut7 and Tut8)
Step 6 - When you are done Compressing the drive and finish closing 
	 the summary of what happened to the drive when you go back
	 into my computer you will notice there is a NEW file in there.
	 It looks like the 3 Floppy but it is not. This file is 
	 just temporary. (REFER TO TUT9)
Step 7 - When you double click and go into the new file there is a text 
	 file which I've included in the Folder called "Open Last"
Step 8 - The following is what is located in the File for the host of 
	 drive A: "

This disk was compressed using DriveSpace 3, which requires Windows 98.

To use this disk, you must first mount it. To mount it:

  1. Run DriveSpace by choosing Run from the Windows 98 Start menu,
     and then typing DRVSPACE.

  2. In DriveSpace, click the drive that contains this disk,
     click the Advanced menu, and then click Mount.

(If this file is located on a drive other than the physical drive
that contains the disk, then the compressed drive is already mounted).

To automatically mount all available compressed drives, click the
Advanced menu, click Settings, and then check the "Automatically mount
new compressed drives" box.

IMPORTANT: To mount and use this compressed disk, you must be running
           Windows 98.

                         "

Step 9 - When you go into the file and read what is displayed 
	 above when you exit out of it you will notice that the NEW
	 file is gone. This is supposed to happen.
	   (REFER TO TUT10)
Step 10 - Now that you have a 2.56 Meg floppy you can tranfer files 
	 to non-networked computers or computers without the internet
	 faster. But if you double click and go in 3 Floppy and there
	 is a file named "Readthis" then you just need to eject the disk
	 and then put it back in.


If you have any Tutorials please E-mail them to me and I will give you full
credit because I am not going to steal any ones work like I hope dosent 
happen with mine..





Contact Information


E-Mail:

therealgonz@hotmail.com

Via Icq:
70503877

I hope to hear from you all..Thanks for downloading this tutorial...



Disclaimer:

Any of the information leading / or causing to the damage of your system or anyone elses system
is solely the responsibility of the owner or user. In no way can the author of this or any other
file in the installer be punishable by law.



TheREALGonz
